Products Center

Product name: 10.6 inches (270 mm) Tungsten Steel Litchi Grain Grinding Wheel with 3 Rollers

 Instruction for use and maintenance of 45pins Bush Hammer

• Adjustment for the grit of bushhammered face

Bushhammered grit can be changed through the adjustment of spring elasticity on the bush hammer, or the press of the manual grinding machine. Both enlarging spring distance to reduce spring elasticity and reducing machine's press can enhance bush

hammer's vibration to make bushhammered face rough. On the contrary, both reducing spring distance to increase spring elasticity and increase machine's press can be reduced bush hammer's vibration to make bush hammer face fine.

• Use and Maintenance for bush hammer

1. RPM of Manual grinding machine: RPM 700-800

2. Use as much water as possible to cool the grinding machine

3. Pay attention to the pressure of the grinding machine on the bush hammer. Make sure that it isn't too great. Or else the roller might not rotate properly and thus decreases the lifespan of the tungsten steel.

4. After using, please wash the stone powder and slurry away on the bush hammer and make it clean with constringent air. Then oil the spindles on both sides of the bearing and turn the rollers to make the oil into the middle of the spindle and sealed ring equably. Or put the bush hammer into the oil to prevent spindle rust and destroying the sealed ring.

5. After using some times, when rollers turn blunt and effect working efficiency, please use a grinder with diamond blades to make it sharper. Then it will resume the efficiency again.

MURAT TOOLS is one of the leading China Bush Hammer Tools manufacturers, welcome to wholesale cheap 10.6 inches (270 mm) tungsten steel litchi grain grinding wheel with 3 rollers from our factory.