TEL    05925099391
You are here: Home » Products » Floor Machine Segments » Bush Hammer Tools » 10.6 Inch (270 Mm) Tungsten Steel Litchi Grain Grinding Wheel With 3 Rollers
Share to:

10.6 Inch (270 Mm) Tungsten Steel Litchi Grain Grinding Wheel With 3 Rollers

Product name: 10.6 inch (270 mm) Tungsten Steel Litchi Grain Grinding Wheel with 3 Rollers Instruction for use and maintaince of 45pins Bush Hammer Adjustment for grit of bushhammered face Bushhammered grit can be changed through the adjustment of spring elasticity on bush hammer, or the press...

Quantity:

Product name: 10.6 inch (270 mm) Tungsten Steel Litchi Grain Grinding Wheel with 3 Rollers


 Instruction for use and maintaince of 45pins Bush Hammer

  • Adjustment for grit of bushhammered face

Bushhammered grit can be changed through the adjustment of spring elasticity on bush hammer, or the press of the manual grinding machine.Both enlarging spring distance to reduce spring elasticity and reducing machine's press can enhance bush

hammer's vibration to make bushhammered face rough.On the contrary, both reducing spring distance to increase spring elasticity and increase machine's press can be reduce bush hammer's vibration to make bushhammed face fine.

 

  • Use and Maintenance for bush hammer

  1. RPM of Manual grinding machine: RPM 700-800

  2. Use as mush water as possible to cool the grinding machine

  3. Pay attention to the pressure of the grinding machine on the bush hammer . Make sure that it isn't too great. Or else the roller might not rotate properly and thus decreases the lifespan of the tungsten steel.

  4. After using, please wash the stone powder and slurry away on bush hammer and make it clean with constringent air. Then oil the spindles on both sides of bearing and turn the rollers to make the oil into the middle of spindle and sealed ring equably. Or put the bush hammer into oil to prevent spindle rust and destroying the sealed ring.

  5. After using some times, when rollers turn blunt and effect working efficiency, please use grinder with diamond blades to make it more sharp.Then it will resume the efficiency again.


MURAT TOOLS is one of the leading China Bush Hammer Tools manufacturers, welcome to wholesale cheap 10.6 inch (270 mm) tungsten steel litchi grain grinding wheel with 3 rollers from our factory.

Hot Tags: 10.6 inch (270 mm) tungsten steel litchi grain grinding wheel with 3 rollers, China, manufacturers, factory, wholesale, cheap
Contact Us
ADD : Unit2A,No.6-8 Huli Avenue,huli,xiamen,Fujian
TELL: +86-592-5099391;+86-17359267897
WEB : www.diamondtoolcenter.com
           www.chinadiamondtool.com
EMAIL : helen@stonediamondtool.com      
Copyright 2019@XIAMEN MURAT TOOLS LIMITED. All Rights Reserved.