TEL    05925099391
You are here: Home » Products » Floor Machine Segments » Metal Bonded Segments » Quick Change Diamond Pcd For Edco Grinder
Share to:

Quick Change Diamond Pcd For Edco Grinder

Quick change diamond for Edco Grinder For removing epoxy coating ,glue Applicaiton: Floor Grinder •••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order. The weight of the machine is partially supported by...

Quantity:

Quick change diamond for Edco Grinder

For removing epoxy coating ,glue

Applicaiton: Floor Grinder

 

•••IMPORTANT: If you run a rotary machine with counter rotating heads, be sure to get 1/2 clockwise and 1/2 counter clockwise PCDs when you order. 

The weight of the machine is partially supported by the large surface area of the diamond segment - this segment limits the PCD's penetration into the concrete. The diamond segment lightly dresses and helps remove the severe marks left by the PCD grinding teeth. This configuration will yield a higher total square foot life span while providing an aggressive rate of coating and concrete removal. Use these PCD tools to remove heavy coatings, overcoats, glues, mastics, thin set and paint. 

PCD (polycrystalline diamond) is the result of sophisticated high-pressure, high-temperature technology in which carefully selected synthetic diamond particles are sintered together in a cobalt matrix. PCD product usually consists of two layers. The PCD layer (usually black) is diamond particles which have been sintered together into a coherent structure using a chemo-mechanical binder and high-pressure, high-temperature conditions similar to those used in single crystal diamond synthesis. The polycrystalline diamond layer is integrally bonded by an advanced process to a super tough tungsten carbide substrate which provides strength and permits welding or brazing with other metals. The random orientation of the diamond particles produces a high uniform hardness four times stronger than carbide with remarkable wear resistance.


MURAT TOOLS is one of the leading China Metal Bonded Segments manufacturers, welcome to wholesale cheap quick change diamond pcd for edco grinder from our factory.
Hot Tags: quick change diamond pcd for edco grinder, China, manufacturers, factory, wholesale, cheap
Contact Us
ADD : Unit2A,No.6-8 Huli Avenue,huli,xiamen,Fujian
TELL: +86-592-5099391;+86-17359267897
WEB : www.diamondtoolcenter.com
           www.chinadiamondtool.com
EMAIL : helen@stonediamondtool.com      
Copyright 2019@XIAMEN MURAT TOOLS LIMITED. All Rights Reserved.